piezobrush – Plasma-Handgerät

Last week, the Japanese Pharmaceuticals and Medical Devices Agency (PMDA) registered relyon plasma as a foreign manufacturer. Together with its new partner Toshin Dental Supply, relyon plasma intends to intensify the use of cold atmospheric pressure plasma in the dental industry in the future.

Takao et al. investigate in vivo and in vitro the effects of plasma treatment on the bioactivity of zirconia/alumina nanocomposites (NANOZR) used as implant materials.

A visualization of activated area on polymers is done with test ink to evaluate atmospheric pressure plasma jets (APPJ). The shrinkage characteristics of the test ink are collected using activation image recording (AIR).

The highlight of this year’s trade show appearance at Bondexpo is the presentation of the compact integration solution piezobrush® PZ3-i for the first time ever. The cold plasma device is designed for integration into existing production lines and is therefore compact, safe, and efficient. Thus, it is ideally suited for pre-treatment prior to gluing, printing, and laminating.

The work from Tsujita et al. investigates the effect of surface modification of titanium implants on bone formation. Especially cold atmospheric plasma treatment shows promising results.

The Case Study of KIT describes the Fabrication of Elastic and Chemically Inert Gaskets Made of PTFE and PDMS Films with piezobrush® PZ3

Relyon plasma presents the piezobrush® PZ3 handheld plasma device for use in dental laboratories at IDS and the innovative implaPrep concept for plasma activation of dental implants.

The group of A. Stratakos investigated the inactivation of the foodborne pathogens Listeria monocytogenes and Salmonella on stainless steel after a treatment with cold plasma.

Sihl GmbH uses the piezobrush PZ3 handheld plasma device for surface treatment before coating complex 3D bodies.

The SKZ conducted a study on the adhesion enhancement of a 2C epoxy adhesive on a low-energy and thus difficult-to-bond plastic polypropylene (PP) with the PDD-technology.

eyecre.at is producing detailed eye models for chriurgy training – plasma is used for joining of different plastics to ensure product quality.

Dariusz Korezc explains in the whitepaper Multi-Device Piezoelectric Direct Discharge for Large AreaPlasma Treatment

Surface Energy Analysis of Dental Implants after Plasma Activation with the piezobrush® PZ3 with the DataPhysics Instruments OCA-PDDS

The piezobrush® PZ3, powered by the CeraPlasTM F-type piezoelectric transformer (PT), is used to generate an atmosphere with a high concentration of chemically active species and ions.

The dental practice Dr. Reichermeier & Dr. Hardt from Regen uses plasma in the dental practice on the one hand for the mounting of dental prostheses such as crowns, bridges and veneers and on the other hand for the treatment of implant surfaces.

Plasma treatment is used to activate the surfaces and thus optimally prepare them for the grafting process so that they become self-sterile.

Plasma treatment improves the adhesion of powder-coated aluminium profiles by surface activation and enables the bonding.

One of the most common applications of cold plasma is the activation of polyolefines, such as polypropylene (PP) prior to an adhesive process.

Plasma is used at in the dental laboratory Till-Jung to optimize and improve processes such as the glazing of ceramic or zirconium crowns or veneering with plastic.

University of West Bohemian reports about the plasma treatment of gold and copper electrodes for environmental and biomedical applications.

By replacing chemicals through plasma the process of bonding optical fibers and aluminum components can be improved.

Due to the relocation of the IDS relyon plasma is organizing webinars on the topic of plasma in the dental industry.

At the University of Stuttgart the plasma handheld device piezobrush® PZ3 is used for plasma activation in 3D printing for microoptics.

Osnabrück University about the physicochemical characterization and bonding of plasma-modified polyetheretherketone for dental applications

Assembly of cables The Leibniz Institute for Baltic Sea Research Warnemünde is using the plasma handheld device piezobrush® PZ3 for the assembly of cables. In the group for Marine Metrology of the Leibniz Institute for Baltic Sea Research the assembly of cables belongs to daily business. For this purpose, an optimal preparation of the cable […]

The Institute of Polymer Nanotechnology is investigating the functionalization of plastic films by plasma treatment with the piezobrush® PZ3.

Enhanced Osseointegration and Bio-Decontamination of Nanostructured Titanium based on Non-Thermal Atmospheric Pressure Plasma.

In the beta test phase Oliver Beier and Andreas Pfuch of INNOVENT e.V. Technologieentwicklung in Jena have investigated the plasma activation of various plastics after treatment with the piezobrush® PZ3 and the module “Standard”.

The piezobrush® PZ2 is used at Rimkus Medizintechnik to guarantee secure adhesive joints between silicone and plastic.

Bonding of polypropylene (PP) in medical technology production is often of insufficient quality, therefore plasma is used for quality assurance at IKA Group.

The plasma handheld device piezobrush is the easy, safe and environmentally friendly way to use plasmatechnology as start-ups and small businesses.

In the user report SITA Messtechnik has investigated the efficiency and effect of plasma cleaning of stainless steel by means of fluorescence measurement.

In order to optimally prepare the surfaces of various materials for adhesion processes, plasma is increasingly being used in electronics industry.

Students of the degree course in plastics and elastomer technology at the University of Applied Sciences Würzburg-Schweinfurt (FHWS) examined the effects of the plasma handheld device piezobrush® PZ2 on various plastics as part of the internship “Measurement of surface tension and pre-treatment” under the direction of Prof. Dr.-Ing. J. Leiber.

relyon plasma presents the smallest plasma handheld device piezobrush® PZ3 for simple, efficient and mobile use of cold atmospheric pressure plasma

We invite you to visit us on May 7, 2020 for the product launch of our new plasma handheld device piezobrush® PZ3 in Regensburg.

We are very happy that the Kunststoff-Zentrum SKZ extended their wide protfolio in surface pre-treatment with the plasma handheld piezobrush.

Gen-Plus uses the plasma handheld piezobrush PZ2 for the plasma treatment of films made of polyethylene and polypropylene.

The Max Planck Institute for Astronomy uses the piezobrush PZ2 for plasma activation of CFRP and glass/glass ceramic adhesive surfaces.

Sabine Schmidt from ISAT at Coburg University reports on the use of plasma in microfluidics to achieve a connection between PDMS and glass substrate.

Plasma technology in 3D printing – Bonding individual parts with significantly improved adhesion

Professional adhesive joints are also possible without large investments by using the piezobrush PZ2. ACT in the field report.

Blickfeld GmbH from Munich reports on their experiences with plasma and semiconductor components with the piezobrush PZ2.

Relyon Plasma will be represented at the Electronica trade show in Munich together with TDK Group. This trade fair presents the world of electronics in the entire spectrum of technologies, trends, products and solutions in the electronics industry.

Through a simple measurement of the surface energy, the activation capacity of a surface treatment may be evaluated and quantified. This allows for a quantitative comparison of the performance and efficiency of various methods of surface treatment using a physically defined quantity.

PDD® Plasma technology improves surface texture and wettability. It is suitable for integration into 3D printers of all kinds and categories of performance.

The new nozzles for piezobrush PZ2 enable applications which were not possible with the standard version of this product.

Mit der PDD® Technologie wird eine Geräteklasse eingeführt, die für medizinische und medizintechnische Anwendungen prädestiniert ist.

We have developed a wear-free plasma source, the piezobrush® PZ2, for the plasma functionalization and disinfection of implants. Plastverarbeiter.de

In orthopedics PEEK implants are standard. Meanwhile, dental implants are made increasingly from the high-performance plastic.

Für die Funktionalisierung von PEEK-Implantaten haben wir ein transportables und einfach zu handhabendes Plasmagerät (piezobrush® PZ2) entwickelt.