Plasma in medical applications

To make it easier for a system developer to work with MediPlas, relyon plasma provides the MediPlas evaluation kit. This kit is primarily intended for research laboratories, standardization institutes, material testing laboratories, didactics/training, PAW manufacturers and many others. With this plug-and-play board, a plasma can be created to generate gases with a variable composition of reactive oxygen and nitrogen species (RONS).

relyon plasma will showcase innovative solutions for disinfection, adhesion optimization, and the integration of plasma technology into industrial processes at the MD&M fair in Anaheim (USA) from February 4 to 6, 2025. Visitors can look forward to exciting live demonstrations on-site.

From 27 to 30 January 2025, relyon plasma will be presenting advanced plasma technology for the medical sector at Arab Health 2025 in Dubai.

Over the last few weeks, the Versuchs- und Lehranstalt für Brauerei in Berlin (VLB) e.V. has carried out extensive tests with the MediPlas RONS generator to reduce live cell counts. The experiments showed that the MediPlas system achieved a reduction in live cell counts of more than 6 log levels after just 5 minutes.

Relyon plasma GmbH and Viromed Medical GmbH are jointly researching the use of cold atmospheric pressure plasma in medicine.

The study investigates the generation of ozone using a plasma reactor based on a novel hybrid dielectric barrier discharge (HDBD). Ozone generation was investigated for a variety of parameters.

At the HZI, the disinfecting and sterilizing effect of plasma from the MediPlas ozone generator is being investigated in infection research.

Piezoeletric cold atmospheric plasma induces apoptosis and autophagy in human hepatocellular carcinoma cells through blocking glycolysis and AKT/mTOR/HIF-1α pathway

This article on the MediPlas system describes the possible areas of application. Ozone is effective against bacteria, spores, fungi, and viruses. The synergistic effect of oxidation (ozone and peroxides) and denaturation enhances the disinfection capability of the output gas.

The chemistry of the plasma discharge is influenced by numerous parameters. The MediPlas system allows for customizing certain parameters, thus optimizing the output gas.

This article describes the operation of the MediPlas Reactor. Depending on the chosen input gas, the MediPlas Reactor converts it into a mixture of ozone, nitrogen oxide components, nitric acid, and peroxides.

From September 27-28, 2023, relyon plasma will present the MediPlas™ system at the 44. ak-adp workshop in Göttingen.

The 3rd Chemistry World Conference will take place in June 2023. Dr. Stefan Nettesheim will give a presentation on the MediPlas® system.

In their study, Jungbauer et al. investigated the use of the cold-atmospheric plasma device piezobrush® PZ3 against periodontal and peri-implant diseases.

Summary of an interesting publication on basic research on the possible use of plasma as an adjuvant therapy for head and neck carcinomas.

The CEO of relyon plasma GmbH was a guest on the Fusion & Plasma Podcast last week and talked to Adam Kit (University of Helsinki) about the future of plasma technology in the medical industry, among other things.

The work from Tsujita et al. investigates the effect of surface modification of titanium implants on bone formation. Especially cold atmospheric plasma treatment shows promising results.

Relyon plasma presents the piezobrush® PZ3 handheld plasma device for use in dental laboratories at IDS and the innovative implaPrep concept for plasma activation of dental implants.

Relyon plasma presents the versatile application possibilities of atmospheric pressure plasma within the webinar series “Plasma in the medical sector”. Starting with the production of medical products, through the dental industry to direct use in medicine and skin treatment.

Matsuomo et al. investigated plasma and UV-light surface modification of titanium surfaces by using quartz crystal microbalance system

relyon plasma is organizing webinars on plasma in the medical sector about plasma in medical production, dental industry and medicine.

Due to the postponement of the IDS, the world’s leading international trade fair for the dental industry, relyon plasma will be hosting webinars to present all the latest plasma innovations in the dental industry.

Dr. Stefan Nettesheim from relyon plasma will give a presentation about cold plasma in disinfection technology at VDI.TECHNIK.TALK.ONLINE.

Cold atmospheric plasma (CAP), the core technology of plasma medicine, is attracting tremendous attention due to its ability and versatility to manipulate various types of cells, including stem cells.

On March 5, 2020 the Arbeitskreis Hygiene Regensburg will organize the Innovation Day: Hygiene 4.0 in Regensburg. relyon plasma will be there as a trade exhibitor!

Relyon Plasma presents at MedtecLIVE how plasma technology can be used easily and efficiently in medical and dental technology.

Gen-Plus uses the plasma handheld piezobrush PZ2 for the plasma treatment of films made of polyethylene and polypropylene.

Scientists of Osaka Dental University researched on the effect of plasma treatment of titanium surface on biocompatibility. The entire test series was performed with the piezobrush PZ2 from relyon plasma.

relyon plasma GmbH presents three new products for the use of plasma technology in the medical and cosmetics industry at MedtecLIVE.

At MedtecLIVE in Nuremberg, relyon plasma GmbH, based in Regensburg, presents new trends and developments in the field of atmospheric plasma applications in medical technology.

Bonding, dosing & moulding of parts and components in medical technology

The new nozzles for piezobrush PZ2 enable applications which were not possible with the standard version of this product.

Plasma technology in dentistry: Devices with PDD® technology can be used particularly efficiently in medical applications and especially in dentistry.

We have developed a wear-free plasma source, the piezobrush® PZ2, for the plasma functionalization and disinfection of implants. Plastverarbeiter.de

In orthopedics PEEK implants are standard. Meanwhile, dental implants are made increasingly from the high-performance plastic.

For the functionalization of PEEK implants, we have developed a transportable and easy-to-use plasma device (piezobrush® PZ2).