Plasma News

Ritzi Industriedrucktechnik GmbH uses the plasma handheld device piezobrush for the pre-treatment of PEI in industrial printing.

Atmospheric pressure plasma is used in wire bonding as a fine cleaning to achieve better connections and thus increase quality and productivity.

Gen-Plus uses the plasma handheld piezobrush PZ2 for the plasma treatment of films made of polyethylene and polypropylene.

The Max Planck Institute for Astronomy uses the piezobrush PZ2 for plasma activation of CFRP and glass/glass ceramic adhesive surfaces.

Sabine Schmidt from ISAT at Coburg University reports on the use of plasma in microfluidics to achieve a connection between PDMS and glass substrate.

Investigation of the adhesion of pressure sensitive adhesives on coated steel by plasma treatment.

TAZ Spiegelau is researching on the coating of glass beads with plasma from the plasmabrush PB3.

Dieter Braun GmbH reports about their expierience with plasma treatment of cables and wires before moulding and encapsulation.

The University of West Bohemia reports on the integration of the high performance plasma system plasmabrush PB3 into an aerosol jet system for 3D printing.

The Drive-4 plasma all-in-one plasma system can be easily integrated into an existing system and the plasma process can be started.

Industrial parts cleaning with plasma is an environmentally friendly and inline-capable cleaning technology that ensures high quality in downstream processes.

Surface activation, surface treatment and precision cleaning are processes now possible with plasma-based tools. Corinna Little of relyon plasma describes the applications and the potential of this modern technology

Plasma technology in 3D printing – Bonding individual parts with significantly improved adhesion

relyon plasma GmbH presents three new products for the use of plasma technology in the medical and cosmetics industry at MedtecLIVE.

The prospects of using a plasma source for conductivity studies are currently investigated by the Philipps-Universität Marburg

Professional adhesive joints are also possible without large investments by using the piezobrush PZ2. ACT in the field report.

During a visit to the laboratory of biofluid mechanics at OTH Regensburg, experiments to improve the adhesion of glass and PDMS with plasma took place.

Blickfeld GmbH from Munich reports on their experiences with plasma and semiconductor components with the piezobrush PZ2.

John P. Kummer GmbH gives an insight into the variety of applications and basics of adhesive technology in the training course on adhesive technology.

On February 21, 2019, relyon plasma was subjected to the scheduled monitoring audit according to rule 9001:2015.

How can you prepare glass for digital printing to create a durable product? We provide a brief overview of pre-treatment for glas printing.

Last week, our colleagues from software development attended the employee training Automation Studio Training at B&R Automation in Heilbronn.

At a sales partner training Relyon Plasma trained the participants to further expand their knowledge of plasma cleaning, plasma processes and bonding

Products from Relyon Plasma are equipped with a CANopen interface. In combination with Anybus gateways, they can be embedded into all network environments.

Roding Automobile GmbH is an internationally active technology company in the field of lightweight construction and electromobility. Read how they use plasmatechnology.

Relyon Plasma will be represented at the Electronica trade show in Munich together with TDK Group. This trade fair presents the world of electronics in the entire spectrum of technologies, trends, products and solutions in the electronics industry.

In cooperation with the Research Institute of Textile Chemistry and Textile Physics of the University of Innsbruck, relyon plasma GmbH has developed the Plasmacell P300 with Piezo Radial Source designed especially for the plasma treatment of textile fibres, yard goods and continuous material.

Surface energy  Determination of surface energy by means of test inks and contact angle measurement, enhancement through plasma treatment Wettability is of major importance for all kinds of surface treatments like printing, varnishing and gluing. It describes the behaviour of liquids on solid surfaces which is dependent on the surface tension of the liquid and […]

Beijing CSTS, our Sales Partner in China, presented Relyon Plasma´s products at the Productronica 2018 in Shanghai from 14th to 16th March at the International Exhibition Center.

The quality management system, valid for the entire Relyon Plasma company, has been re-certified by Deutsche Managementsystem Zertifizierungsgesellschaft mbH without objection, thus confirming that all structures, processes and procedures of the company are subject to constant control and therefore to continuous improvement.

Relyon Plasma GmbH expands market presence with new shareholder TDK subsidiary EPCOS AG

With the plasmabox, relyon plasma presents a compact solution based on state-of-the-art technology. It is simply integrated into the existing system and the plasma process can be started.

Bonding, dosing & moulding of parts and components in medical technology

Dr. Dariusz Korzec will attend a workshop on the treatment of polymer surfaces. He will talk about plasma treatment of polymers before coating.

Our sales partners ADL Prozesstechnik and Löhnert Industriebedarf presented our Piezobrush PZ2 at the Productronica 2017 in Munich.

Plasmatool, the high-efficient plasma handheld device for surface treatment. The perfect tool for flexible and easy surface treatment in industrial environments.

Relyon Plasma will be next week at the SMT Hybrid Packaging Fair which is celebrated in Nuremberg. It is the only event in Europe which takes a comprehensive view of system integration in microelectronics.

Relyon Plasma GmbH has already presented its products at the Productronica in Shanghai for the third time.

We invite you to visit our Sales Partner Ulbrich at the International Industrial Fair 2017 in Celje, which will take place from 4th to 7th April.

Relyon Plasma will be this year present at Productronica China 2017. This fair showcases the entire value chain in electronics production in all industrial sectors.

Relyon Plasma will be this year present at the JEC World 2017, the largest international gathering of composites professionals.

In order to strengthen our international presence, we have met this week our two new sales partners: Victor Santos, CEO from Victor Santos Lda. in Portugal, and Edvegny Medvedev, technical director in Partitech LCC, our sales partner in Russia.

We are glad to announce that in 2017 we will participate in two big events: Productronica China and JEC Composites.

Relyon Plasma offers you an excellent infrastructure and works in a technologically innovative environment. Send us your unsolicited application

During the MedTech Summit in Nuremberg our specialists informed about the successful use of plasma technology in a medical environment.

PDD® Plasma technology improves surface texture and wettability. It is suitable for integration into 3D printers of all kinds and categories of performance.

The new nozzles for piezobrush PZ2 enable applications which were not possible with the standard version of this product.

TDK cooperates with relyon plasma to develop and manufacture cutting-edge plasma solutions

Together with our partner ZMC we were at Productronica in Shanghai. We have some impressions of our booth for you.

The Plasmasystem FG1-01 is an integrated solution for those applications where several plasmasystems are required. For plasma generation, the necessary PS2000® power supplies are driven by the control system.

To activate electronic components we designed the floating A250 nozzle. This nozzle for sensitive materials is used with the plasmabrush® PB3 System.

Eine von der Relyon Plasma GmbH gestellte Aufgabe wurde von Studierenden der OTH Regensburg bearbeitet und im Rahmen der Lehrveranstaltung „Anwendung Konstruktion“ ausgezeichnet.

Dr. Nettesheim talks with Mr. Löhner from DICO Electronic of the latest aspects of surface treatment with plasma atmospärischem.

In February 2015, we were DIN EN ISO 9001:2008 certified by the Deutsche Managementsystem Zertifiezierungsgesellschaft mbH after the introduction of a quality management system.