DBD technology
MediPlas® Reactor

MediPlas® Reactor

High-yield atmospheric ozone generator as a component for sterilizing and disinfection in clean in place (CIP)

mediplas reactor von relyon plasma

TheMediPlas® Reactor is a high-yield ozone generator from relyon plasma. The component is based on cold atmospheric plasma (CAP) and can be used for cleaning, sterilizing and disinfecting, for example in medical technology. The device generates plasma and RONS (reactive oxide and nitrogen species) and ROS (reactive oxide species) arising in the secondary plasma. The MediPlas® Reactor can reduce the concentration of pathogens in contact with contaminated surfaces like medical equipment, masks and tubing. Also odors and germs can be eliminated.
Anwendung in der Dentaltechnik
Anwendung MediPlas® Reactor in der Medizin
Desinfektion und Sterilisation bei Schlafapnoe

Different to VHP and ETO sterilizers, the MediPlas® system requires no additional chemicals. The MediPlas process uses just air (or oxygen) and electricity to produce efficient sterilant gases.  The applications do not require expensive vacuum equipment or toxic chemicals, making its use costeffective on one and environmentally friendly on the other hand. Also, the overall power consumption is low.

Contact us >>

 

Application areas

The cold atmospheric plasma components can be used anywhere where hygiene plays an important role. The ozone generator can be integrated in the medical and dental field, but also in the food industry, agriculture, the pharmaceutical industry and in packaging and consumer goods for disinfection and sterilization. The integration of the DBD component makes it possible to reprocess medical products without chemical and thermal disinfection. These plasma components are also used to generate clean air and clean water.

The typical clean in place cycle (CIP) can be optimized by integrating ozone generation. The typical clean in place cycle contains six steps:

  1. rinse
  2. wash
  3. rinse
  4. chemical/thermal disinfection
  5. rinse
  6. drying

The optimized clean in place cycle with the integration of ozon gerneration contains only four steps:

  1. rinse
  2. wash
  3. rinse
  4. disinfect

This leads to savings in time, energy and consumables.

Possible applications include and are not limited to:

  • Internal sterilization of home hemodialysis equipment
  • Dentist chair fluidic system sterilization
  • Low temperatures sterilization for medical tools
  • Hospital floor cleaning with plasma activated water

Multiple MediPlas® Reactor blocks can be arranged in parallel or in series to increase concentration and flow rate. One MediPlas®-Drive can supply three MediPlas®-Reactors.

Technology

  • High durability; easy integration
  • High ozone concentration
  • Reactor fully stable against high humidity level
  • Reactor can be operated on pure (medical) oxygen to yield high ozone concentrations > 50.000 ppm
  • Easy to combine with PSA
  • Reactor can also be operated to yield high NOx output for agricultural and gardening applications such as inline fertilization

Versatile Output

Input:

  • Oxygen
  • Dry air
  • Wet air

Output:

  • Oxygen → very high ozone concentration
  • Dry air → ozone; temperature-controlled NOx
  • Wet air → ozone, temperature-controlled peroxides and acidity

Technical Data

  • Typical Input power: 30 W
  • HV Input: HV cabel
  • HV Output:
  • Width: 78 mm
  • Height: 73,3 mm
  • Depth: 78 mm
  • Weight: 0,23 kg
  • Reference signal:
  • Typical ambient temperature: 10 to 40 °C

Advantages

  • High ozone concentration
  • Low gas flow and low power consumption
  • Stability in long-term operation
  • Active cooling
  • Easy power control
  • Low thermal signature
  • Cost-effective
  • Small size
  • Simple integration into appliance

 

Related Products

Contact
close slider

    How did you hear about us?


    In order to be able to process your request, please give your consent to store your data. You can object to your consent at any time.